Problems noted when MPLab v6.10 was installed.

1- Installing MPLab changed the association for .hex files and they
   can no longer be downloaded by XWisp with a double-click.

2- The extension associated with MPLab IDE project files (.mcp) is the
   same as the extension used by Metroworks. Even though MPLab was
   installed after the Metroworks compiler on my system, .mcp files
   remain associated with Metroworks. So double-clicking on the .mcp
   files will start up the Metroworks IDE and not the MPLab IDE.

3- When I changed the directory name for the project, I found that the
   .mcp and .mpw files could not be used because they still had
   references to files in the old directory. That means that for the
   .mcp and .mpw files to be useful for someone else, they would have
   to create a directory structure that precisely matched mine. The
   files could not be put on another drive (for example D: instead of
   C:) or placed in sub-directory. So I eliminated the .mcp and .mpw
   files and added instructions to the README.txt file explaining how to
   create a project.


Tracking:
$Id: Notes.txt,v 1.2 2003/03/14 02:03:43 jerry Exp $
$Source: /home/cvsroot/projectsTop/picProjectBoard/examples/mplab_example/Notes.txt,v $